Just about bordering on odd, I see things through different eyes.The heading says it all - I live, I love, I craft, I am me...

08/12/2020

S'no joke - the 'how to do' episode

Belinda from Mad Englishwoman and Dog asked for a reminder how to make paper snowflakes and while I was knitting and sipping coffee, I hatched a plan to do a quick tutorial once I'd cast off from the sleeve I had nearly finished. 

Here goes!
  • You'll need paper (I just used plain white A4, however there is no reason why you can't use metallic or patterned paper here - I would advise against using too thick a paper as it gets harder to cut once it is folded 12 times.
  • Ruler
  • Scissors * - small sharp pointed ones are best for cutting delicate detail
  • And/or a craft knife *(I use a medical grade scalpel handle and non surgical size 10 scalpel blades*
  • Cutting board
  • Pencil/pen
* the usual T&Cs - be careful with sharp pointy things etc 

To make six sided star or flake, you will need to make your A4 paper into a perfect square. 
Fold a top corner across until the edge is perfectly lined up with the diagonally opposite edge 
and flatten the fold firmly down.
Draw lightly (I've used a marker pen to make sure is visible) where the lower edge of the square is above the excess paper.
Cut off the surplus paper and save it for later.
Refold your square back into a triangle, 
then fold again into quarters.
Once again, firm down the fold to make a sharp crease.
Now here comes (in my opinion) the fiddliest part of the process.  
Turn your folded paper point down (the 90° corner)
 you need to fold the triangle into three from this point. 
I found the best way was to crease the very tip of the bottom point with my finger nail 
to help the paper bend at this point. 
Then curl the paper as if making a cone. 
Once it appears that the cone is equally curled to create three sections, 
flatten it, again making sure all sections are equally folded
and the folds pressed down as firmly as possible.
Turn your now flattened cone until the two upward pointed corners are at the back
and the flat edge is facing you. You need to cut off the pointed corners to match that edge.
Now the fun part, 
turn your triangle sideways so that the single fold is along the base 
and the double folds are at the top.
Grab your pencil and sketch out a profile - you don't need to colour in the sections to be removed, 
I did at first and it made it easier to plan, 
I have done it here to make it show more clearly.
Cut away the 'negative space' leaving your flake.
Which when opened will reveal your pattern! Voila!
You can go as complicated or as simple as you fancy - this one is a pretty simple shape, 
some I made became so intricate that I had to resort to refilling my coffee mug and falling upon a ginger and lemon shortbread to give me strength!

Oh yes ... remember that discarded and stashed for later piece of paper?

Well, just fold in half lengthways, then, as before, fold over the top corner to make a square. 
Keeping the folded edge as the centre of the star/flake (see pointed arrow)
sketch out a shape to make the top triangle as the centre of the flake 
and keep the folded edge of the long piece in the centre of the tail.
I just free cut with the scalpel blade - which is always a little risky as I can never predict the design - as it just 'happens' .
So, there you have it - this snow flake is less winter-wonderland and more snow sprite - perfect :D

Hope this helps, and if you need further inspiration and certainly better instructions and more traditional finished snowflakes - have a look HERE and HERE and HERE!


Oh well, now to start the second sleeve, excuse my while I put the kettle on, 
clear up the snow storm and cast on :)

18 comments:

  1. Thanks for the tutorial and links. I am seeing quite a few windows decorated with these type of snowflakes and they do look so effective...magical in fact. A very interesting post and nice clear visuals and instructions. keep well Amanda x

    ReplyDelete
  2. Thank you for this very clear tutorial. I always need a reminder each time I make them. X

    ReplyDelete
    Replies
    1. :) glad it will be of some use, hope you and Lily share your snowflakes x

      Delete
  3. Thanks for the tutorial & if I have some time I'll give it a whirl, but then I suppose even any time of the year would be fun. Take care & huggles.

    ReplyDelete
  4. And thanks for the mention as well! :-)

    ReplyDelete
  5. What a fabulous and detailed tutorial. I might give it a go but no idea when! If I make some in March, I can put them away for next Christmas....

    ReplyDelete
    Replies
    1. or they could live on your non festive festive tree hahahaha :D

      Delete
  6. ❄️ ❄️ ❄️ Well done you - so generous, I know it takes a lot of time, thought and planning to make "a quick tutorial" like this. ❄️ ❄️ ❄️

    ReplyDelete
    Replies
    1. thank you xx it was a lovely time-waster which I thoroughly encourage!

      Delete
  7. I keep meaning to ask - has the self-drowning wood burner been sorted?

    ReplyDelete
    Replies
    1. Yes and no - we are no longer swimming around in tepid water with a gasping fire, but we are unable to do anything about the central heating until the new year - however the house is warm (and dry) the fire is working happily and is now fully house trained :)

      Delete
    2. Acck, sending warming hugs. A couple of years ago we had no heating for nearly two weeks over Christmas and that was no fun, no fun at all.

      Delete
  8. Thank you so much Kate - will definitely give this a go :)

    ReplyDelete

Hi there...

Thank you ever so much for stopping by today - I'm really glad that you did. If you would like to leave me a comment then I would be delighted to hear from you, any one signing as anonymous or writing anything unkind, political, any form of hate or computer generated will be acknowledged as spam and deleted.

Hawthorn x

Note: only a member of this blog may post a comment.